Replacing Fuses
The power entry module of the SFC Control Module unit contains an external fuse drawer that is user serviceable.
To replace fuses: (before replacing fuses, first try to determine cause of fuse activation and repair)
Parts required
Qty. | p/n | Description | |
|---|---|---|---|
1 | 
|
| Fuses with 8A 250V |
-
Power down the unit.
-
Disconnect the power cable from the power entry module.
-
Depress the release lever of the fuse drawer and pull the drawer straight back to remove.
-
Replace blown fuses with 8 A250 V Time Delay fuses of matching size. (A set of replacement fuses is included shipping kit).
-
Replace the fuse drawer by sliding it into the power entry module until it locks into place.
base-id: 4540390411
id: 4540390411