Specifications

Weight

14.7 kg (32.4 lbs)

Dimensions (height × width × depth)

180 x 396 x 436 mm (7.1 x 15.6 x 17.2 inches)

Line voltage

100–240 V~, ±10%

Wide-ranging capability

Line frequency

50 or 60 Hz, ±5%

Power consumption

80 VA, 70 W

Ambient operating temperature

4–55 °C (39–131 °F)

Ambient non-operating temperature

-40–70 °C (-40–158 °F)

Humidity

< 95% r.h. at 40 °C (104 °F)

Non-condensing

Operating altitude

Up to 3000 m (9842 ft)

Safety standards: IEC, EN, CSA, UL

Overvoltage category II, Pollution degree 2

For indoor use only

ISM classification

ISM Group 1 Class B

According to CISPR 11

Detection type

Refractive Index

Designed for use with Agilent InfinityLab Assist

Intuitive User Interface, Automated Workflows, Predictive Maintenance & Assisted Troubleshooting

Refractive index range

1.00 – 1.75 RIU, calibrated

Measurement range

± 600·10^-6 RIU

Optical zeroing

Digitally via software, manually via set screw

Optics temperature control

5 °C above ambient to 55 °C

Sample cell

Volume: 2.5 µL

Maximum pressure: 5 bar (0.5 MPa)

Maximum flow rate: 1 mL/min (100 % water)

Valves

Automatic purge and automatic solvent recycle

Volumes

Inlet port to sample cell 2.5 µL,

inlet port to outlet port 265 µL

Liquid contact materials

316 stainless steel, PTFE and quartz glass

pH range

2.3 – 9.5 

Performance specifications

Short term noise: <±1.75·10^-9 RIU

Drift: <200·10^-9 RIU/h

Time programmable parameters

Polarity, peak width

Maximum data rate

148 Hz

Detector zero

Automatic zero before analysis

Instrument control

LC and CE Drivers A.02.12 or above

Instrument Control Framework (ICF) A.02.03 or above

InfinityLab Assist (G7180A) with firmware D.07.40 or above

Agilent Instant Pilot (G4208A) with firmware B.02.19 or above

Lab Advisor B.02.07 or above

Analog output

Recorder/integrator: 100 mV or 1 V, output range selectable, one output

Communication

LAN, Controller Area Network (CAN)

Extended Remote Interface (ERI): ready, start, stop and shut-down signals

Safety and maintenance

Extensive diagnostics, error detection and display with Agilent InfinityLab Assist and with Agilent Lab Advisor software. Leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.

GLP

Early maintenance feedback (EMF) for continuous tracking of instrument usage with user-selectable limits and feedback messages. Electronic records of maintenance and errors. Automated operational qualification/performance verification (OQ/PV).

Housing

All materials recyclable.