Specifications

Weight

11.5 kg (25.4 lbs)

Dimensions (height × width × depth)

140 x 396 x 436 mm (5.5 x 15.6 x 17.2 inches)

Line voltage

100–240 V~, ±10%

Wide-ranging capability

Line frequency

50 or 60 Hz, ±5%

Power consumption

110 VA, 100 W

Ambient operating temperature

4–55 °C (39–131 °F)

Ambient non-operating temperature

-40–70 °C (-40–158 °F)

Humidity

< 95% r.h. at 40 °C (104 °F)

Non-condensing

Operating altitude

Up to 3000 m (9842 ft)

Safety standards: IEC, EN, CSA, UL

Overvoltage category II, Pollution degree 2

For indoor use only

ISM classification

ISM Group 1 Class B

According to CISPR 11

Detection type

1024-element photodiode array

Designed for use with Agilent InfinityLab Assist

Intuitive User Interface,
Automated Workflows,
Predictive Maintenance &
Assisted Troubleshooting

Light source

Deuterium lamp

Number of signals

8

Maximum data rate

240 Hz (both spectra and signals)

Short term signal noise (ASTM)

With 10 mm Max-Light cartridge cell: <±3·10^-6 AU/cm at 230 nm, slit width 4 nm, TC 2 s

With 60 mm Max-Light cartridge cell: <±0.6·10^-6 AU/cm at 230 nm, slit width 4 nm, TC 2 s

Drift

< 0.5·10^-3 AU/h at 230 nm

Linear absorbance range

> 2 AU (5 %) at 273 nm, typically 2.5 AU (5 %)

Wavelength range

190 – 640 nm

Wavelength accuracy

± 1 nm, self-calibration with deuterium lines

Wavelength precision

< ± 0.1 nm

Wavelength bunching

2 – 400 nm, programmable in 1 nm steps

Slit width

1, 2, 4, 8 nm

Diode width

~0.5 nm

Nominal spectral resolution

< 1 nm

Time programmable

Wavelength, polarity, peak width, lamp bandwidth, auto balance, wavelength range, threshold, spectra storage mode

Flow cells

User-exchangeable, self-aligning cartridge cells with RFID tags.

Max-Light Cartridge Cell (Standard): 10 mm, σ_V = 1.0 µL

Max-Light Cartridge Cell (High Sensitivity): 60 mm, σ_V = 4 µL

Max-Light Cartridge Ultra Low Dispersion (ULD) Cell: 10 mm, σ_V = 0.6 µL

Max-Light Cartridge High Dynamic Range (HDR) Cell: 3.7 mm, σ_V = 0.9 µL

Max-Light Cartridge Cell LSS: 10 mm, σ_V = 1.0 µL

Maximum Operating Pressure (MOP)^{Maximum operating pressure (MOP)}: 70 bar

Maximum Incidental Pressure (MIP)^{Maximum incidental pressure (MIP)}: 150 bar

Spectral tools

Data analysis software for spectra evaluation, including spectral libraries and peak purity functions

Analog output

Recorder/integrator: 100 mV or 1 V, output range 0.001 – 2 AU, one output

Instrument control

LC and CE Drivers A.02.11 or above

Instrument Control Framework (ICF) A.02.04 or above

Lab Advisor B.02.06 or above

InfinityLab Assist (G7180A) with firmware D.07.40 or above

Agilent Instant Pilot (G4208A) with firmware B.02.19 or above

For details about supported software versions refer to the compatibility matrix of your version of the LC and CE Drivers

Communication

LAN, Controller Area Network (CAN), USB

ERI: ready, start, stop and shut-down signals

GLP

RFID for electronics records of flow cell and UV lamp conditions (path length, volume, product number, serial number, test passed, usage).

Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with user settable limits and feedback messages. Electronic records of maintenance and errors. Verification of wavelength accuracy with deuterium lines.

Safety and maintenance

Extensive diagnostics, error detection and display through Agilent InfinityLab Assist, Agilent Instant Pilot and Agilent Lab Advisor software. Leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.

Housing

All materials recyclable.

Others

Second generation of Electronic Temperature Control (ETC) for the complete optical unit.