Specifications

Weight

12.5 kg (27.6 lbs)

Dimensions (height × width × depth)

160 x 435 x 436 mm (6.3 x 17.1 x 17.2 inches), Width with column identification kit: 472 mm

G7116B may have a Column ID tag reader on both sides.

Line voltage

100–240 V~, ±10%

Wide-ranging capability

Line frequency

50 or 60 Hz, ±5%

Power consumption

150 VA, 150 W

Ambient operating temperature

4–55°C (39–131°F)

Ambient non-operating temperature

-40–70°C (-40–158°F)

Humidity

< 95% r.h. at 40°C (104°F)

Non-condensing

Operating altitude

Up to 3000 m (9842 ft)

Safety standards: IEC, EN, CSA, UL

Overvoltage category II, Pollution degree 2

For indoor use only

ISM Classification

ISM Group 1 Class B

According to CISPR 11

Operating principle

Thermostatted column compartment with dual, independent Peltier element.

Solvent pre-heating and still-air operation for reduction of chromatographic band broadening under UHPLC-conditions. Up to four devices can be clustered and controlled by a single user interface for additional flexibility.^{Requires LC and CE drivers A.02.12 or above}

Designed for use with Agilent InfinityLab Assist

Intuitive User Interface, Automated Workflows, Predictive Maintenance & Assisted Troubleshooting

Temperature range

20 °C below ambient (minimum 4 °C) to 110 °C

^{All specifications are valid for distilled water at ambient temperature}

Temperature range increment

Settable in steps of 0.1 °C

^{All specifications are valid for distilled water at ambient temperature}

Temperature stability

± 0.03 °C

^{All specifications are valid for distilled water at ambient temperature}

Temperature accuracy

± 0.5 °C (with calibration at 40 °C)

^{All specifications are valid for distilled water at ambient temperature}

Temperature precision

0.05 °C

^{All specifications are valid for distilled water at ambient temperature}

Independent temperature zones

2 (in single device)

Up to 8 in clustered configuration^{Requires LC and CE drivers A.02.12 or above}

Column capacity

8 columns of 100 mm length plus Quick Connect fittings or pre-columns

4 columns of 300 mm length plus Quick Connect fittings or pre-columns

Selection of columns by single optional integrated 8-column selector valve (1300 bar)

Maximum of

32 columns of 100 mm length plus Quick Connect fittings or pre-columns

16 columns of 300 mm length plus Quick Connect fittings or pre-columns

with clustering^{Requires LC and CE drivers A.02.12 or above} of four devices.

Heat-up/cool-down time

5 min from ambient to 40 °C

10 min from 40 °C to 20 °C

<30 min from 25 °C to 100 °C

^{All specifications are valid for distilled water at ambient temperature}

Solvent heat exchangers

Individually quick-installable for every column. Available at 1 µL internal volume, 0.075 mm i.d. capillary (ultra-low dispersion), 1.6 µL internal volume, 0.12 mm i.d. capillary (standard) and 3 µL internal volume, 0.12 mm i.d. capillary (high-flow).

Valve options

1 x integrated valve drive as option

2 x external valve drives as option

to host user-exchangeable Quick Change valve heads (up to 1300 bar) of different formats:

2-position/6-port, 2-position/10-port, 4-column selection (4-position/10-port) up to 800 bar, 6-column selection (6-position/14-port), 8-column selection (8-position/18-port).

Valve heads are automatically identified by their RFID tag.

Column identification

Optionally, column identification kit to track history of up to eight columns. Mounted on left- and right-hand side of module.

Instrument control

LC and CE Drivers A.02.11 or above

Instrument Control Framework (ICF) A.02.04 or above

Lab Advisor B.02.06 or above

InfinityLab Assist (G7180A) with firmware D.07.40 or above

Agilent Instant Pilot (G4208A) B.02.19 or above

For details about supported software versions refer to the compatibility matrix of your version of the LC & CE Drivers.

Communication

Controller Area Network (CAN)

G7116B is a hosted module. (The LC stack needs to contain suitable host module or a LAN card for communication and control).

Maintenance and safety-related features

Extensive diagnostics, error detection and display (through Instant Pilot control module and Agilent Lab Advisor), leak detection, safe leak handling, leak output signal for shutdown of pumping system.

Low voltages in main maintenance areas. Door-open sensor.

GLP features

Valve heads carrying tags with serial number, pressure rating, number of switches and valve type.

Concept of column identification.

Housing

All materials recyclable