Injection Valve Assembly (600 bar)

5067-4191 (Manual Front Loading Injector Valve, 600 bar) with start cable (complete assembly), including operating instructions, needle port cleaner, vent tubes (×2) and fittings, 5/64 and 9/64-inch hex keys. Includes items 1 – 8 .

Figure: Injection valve assembly

Parts list

	p/n	Description
1	1535-4045	Rulon Bearing ring
2	1535-4046	Isolation seal
3	5068-0052	Rotor Seal (PEEK)
4	5068-0119	Stator ring
5	0100-1859	Stator Face Assy
6	0100-1860	Stator head
7	5068-0020	Stator Screws, 10/pack
	8710-0060	Wrench, 9/64 inch hexagonal
	0490-1849	Position-sensing switch
8	1400-3166	Ring stand, mounting bracket

NOTE

Accuracy of sample loops

The actual volume of a sample loop can differ by +/- 10 % for a 20 µL loop. Smaller loops can have a greater deviation and bigger loops a smaller one. Use partial loop filling if you must know the actual injected volume.

Parts list

Sample loops stainless steel

	p/n	Description
	0101-1248	Sample loop 5 µL
	0100-1923	Sample loop 10 µL
	0100-1922	Sample loop 20 µL
	0100-1924	Sample loop 50 µL
	0100-1921	Sample loop 100 µL
	0101-1247	Sample loop 200 µL
	0101-1246	Sample loop 500 µL
	0101-1245	Sample loop 1 mL
	0101-1244	Sample loop 2 mL
	0101-1243	Sample loop 5 mL

Parts list

Sample loops PEEK

	p/n	Description
	0101-1241	Sample loop 5 µL
	0101-1240	Sample loop 10 µL
	0101-1239	Sample loop 20 µL
	0101-1238	Sample loop 50 µL
	0101-1242	Sample loop 100 µL
	0101-1237	Sample loop 200 µL
	0101-1236	Sample loop 500 µL
	0101-1235	Sample loop 1 mL
	0101-1234	Sample loop 2 mL
	0101-1230	Sample loop 5 mL

21-Jun-2025