Position-Sensing Switch (G1328C)

When

Tools required

Qty.		p/n	Description
1			Hexagonal key, 9/64 inch

Parts required

Qty.		p/n	Description
1		0490-1849	Position-sensing switch

Disconnect the sensor cable from the start cable. Pull the sensing switch out of the stator ring.
Insert the new sensing switch into the stator ring.
Ensure the pin in the stator ring is aligned with the hole in the valve body and the position sensoring switch is back in place.
Ensure the pin in the stator ring is aligned with the hole in the stator head.
Tighten each screw alternately ¼-turn until the stator head is secure.
Reconnect the sensor cable to the start cable.