Exchanging the Injection Valve Seal (G5628A)
When
|
Tools required
Qty. | p/n | Description | |
|---|---|---|---|
1 | 
|
| Hexagonal key, 9/64 inch |
Parts required
Qty. | p/n | Description | |
|---|---|---|---|
1 | | 5068-0082 | Rotor Seal 600 bar Manual Injector |
-
-
-
Install the new rotor seal.
NOTE
Beware of correct orientation. The rotor seal grooves must be visible.
-
Ensure the pin in the stator ring is aligned with the hole in the stator head.
-
Tighten each screw alternately ¼-turn until the stator head is secure.
base-id: 4402172939
id: 4402172939