Exchange the Injection Valve Seal (G1328C)
When
|
Tools required
Qty. | p/n | Description | |
|---|---|---|---|
1 | 
|
| Hexagonal key, 9/64 inch |
Parts required
Qty. | p/n | Description | |
|---|---|---|---|
1 | | 5068-0052 | Rotor Seal (PEEK) |
-
-
-
-
-
Ensure the new seal is positioned as shown.
-
Ensure the pin in the stator ring is aligned with the hole in the valve body and the position sensoring switch is back in place.
-
-
Ensure the pin in the stator ring is aligned with the hole in the stator head.
-
Tighten each screw alternately ¼-turn until the stator head is secure.
base-id: 4402169227
id: 4402169227