Leak Drainage

WARNING

Leaking injector fittings

In the event of a leak, solvent will drop into the leak channel in the baseplate, from where it is channelled to the front and back of the baseplate.

Check the manual injector fittings periodically for signs of leakage.

NOTE

The example below shows the leak drainage for the Agilent 1260 Infinity III Manual Injector (G1328C). The principle is the same for all Agilent Manual Injectors.

Connect a silicon tube to the nozzle of the leak drainage.
Route the other end of the tube into the waste.

Figure: Leak drainage