Place the detector conveniently near your HPLC system. The modular design of the ELSD enables you to locate it anywhere within the limitations imposed by the length of the power cord, fluid lines, and signal cables.
To keep liquid dead volume as low as possible and to minimize peak broadening in the lines, the distance between the column outlet and the flow cell inlet should be kept to a minimum.
Provide approximately 10 cm (4 inches) of space behind the unit so that the cooling fan intake is not impeded, and to allow easy access to the rear panel.
The ELS detector can be placed within 2 m of an extraction unit, using the exhaust tube provided.
base-id: 4343442187
id: 4343442187