Replace the Heat Exchanger (G7132A)
| For biocompatible modules use bio / biocompatible parts only! Do not mix with bio-inert parts. |
Tools required
Qty. | p/n | Description | |
|---|---|---|---|
1 | 
|
| Wrench, 19 mm |
1 | | 5023-2501 | Screwdriver Torx-T10 |
1 | | 5067-5688 | Torque wrench 1 - 25 Nm with 14 mm wrench |
1 | | G4220-20013 | 4 mm hex bit |
1 | | G4220-20015 | Adapter ¼ in square to hex |
1 | | G4220-20041 | Bit Torx 10x25 mm |
Parts required
Qty. | p/n | Description | |
|---|---|---|---|
1 | | G7131-60005 | Heat Exchanger for biocompatible Pump |
Prerequisites
|
-
-
-
Remove the screw.
-
-
Insert the new heat exchanger into the opening of the pump head and lift it over the pins.
-
-
base-id: 4291427979
id: 4291427979