Current of Secondary Pump Drive Too High

Error ID: 22434

The current of the secondary pump drive is too high.

Subpages

Probable cause	Suggested actions
1	Blockage of flow path between secondary pump head and pressure sensor, e.g. of the heat exchanger.	Check for blockages in the flow path. Please contact your Agilent service representative.
2	Secondary pump drive is defect.	Please contact your Agilent service representative.

Probable cause

Suggested actions

Blockage of flow path between secondary pump head and pressure sensor, e.g. of the heat exchanger.

Check for blockages in the flow path.

Please contact your Agilent service representative.

Secondary pump drive is defect.

Please contact your Agilent service representative.