Current of Primary Pump Drive Too High

Error ID: 22433

The current of the primary pump drive is too high.

Subpages

Probable cause	Suggested actions
1	Blockage of flow path between primary pump head and pressure sensor, e.g. of the heat exchanger.	Check for blockages in the flow path. Please contact your Agilent service representative.
2	Primary pump drive is defect.	Please contact your Agilent service representative.

Probable cause

Suggested actions

Blockage of flow path between primary pump head and pressure sensor, e.g. of the heat exchanger.

Check for blockages in the flow path.

Please contact your Agilent service representative.

Primary pump drive is defect.

Please contact your Agilent service representative.