Specifications of the G7167C Hybrid Multisampler

Weight

22 kg (48.5 lbs)

w/o sample thermostat

Dimensions (height × width × depth)

320 x 396 x 468 mm (12.6 x 15.6 x 18.4 inches)

Line voltage

100–240 V~, ±10%

Wide-ranging capability

Line frequency

50 or 60 Hz, ±5%

Power consumption

180 VA, 180 W

Ambient operating temperature

4–40 °C (39–104 °F)

Ambient non-operating temperature

-40–70 °C (-40–158 °F)

Humidity

< 95% r.h. at 40 °C (104 °F)^{SampleThermostatIncluded}

Non-condensing

Operating altitude

Up to 3000 m (9842 ft)

Safety standards: IEC, EN, CSA, UL

Overvoltage category II, Pollution degree 2

For indoor use only.

ISM Classification

ISM Group 1 Class B

According to CISPR 11

Permitted solvents

Boiling point ≥ 56 °C (133 °F)

Auto-ignition temperature ≥ 200 °C (392 °F)

Designed for use with Agilent InfinityLab Assist

Intuitive User Interface, Automated Workflows, Predictive Maintenance & Assisted Troubleshooting

Injection range

Injection precision

< 0.15% RSD or SD < 20 nL, whatever is greater

Measured caffeine, degassed Feed solvent

Injection linearity

0.9999 in the range of 0.1–100 μl

Measured caffeine, degassed Feed solvent

Injection linearity

Up to 800 bar

Sample viscosity range

0.2–5.0 cP

Sample capacity

1H Drawer up to 8 drawers and 16 positions shallow well plates (MTP)

Max. 6144/1536 samples (384 MTP/96)

2H Drawer up to 4 drawers and 8 positions MTP, deep well plates, vials, Eppendorf

3072 samples, 432 vials (2 mL)

3H Drawer up to 2 drawers and 4 positions MTP, deep well plates, vials up to 6 mL, Eppendorf

1536 samples, 60 vials (6 mL), 384 vials (1 mL), 216 vials (2 mL)

Injection cycle time

< 10 s using following standard conditions:

Default draw speed: 100 μL/min

Default eject speed: 400 μL/min

Injection volume: 1 μL

Time between 2 injections is not mechanically limited, time delay depends on communication speed of software, OS or network connections

Carryover

< 0.003% (30 ppm)

Measured chlorhexidine, degassed Feed solvent

Instrument control

LC & CE Drivers A.03.06 or above

Instrument Control Framework (ICF) A.02.04 or above or above

InfinityLab Assist (G7180A) with firmware D.07.40 or above

Lab Advisor B.02.20 or above

For details about supported software versions refer to the compatibility matrix of your version of the LC & CE Drivers

Communication

Controller Area Network (CAN)

Local Area Network (LAN)

ERI: ready, start, stop and shut-down signals

Maintenance and safety-related features

Extensive diagnostics, error detection and display with Agilent InfinityLab Assist and with Agilent Lab Advisor software.

Leak detection, safe leak handling, leak output signal for shutdown of pumping system, and low voltages in major maintenance areas

GLP features

Early maintenance feedback (EMF) for continuous tracking of instrument usage with user-settable limits and feedback messages. Electronic records of maintenance and errors

Sustainability

All materials recyclable.