Hydraulic Path Leak Test (G7167C, G7137B Hybrid Multisamplers)
The Hydraulic Path Leak Test determines the injection and sampling path leak rates of the samplers internal hydraulic path. Using the Analytical Head and Pressure Sensor, it can be executed without the pump of the LC system.
The test proceeds as follows:
Prompt to ensure that the Purge solvent is connected to port S2 of the Solvent Selection Valve.
The flow path is purged.
A leak measurement is performed for the sampling path.
The flow path is purged.
A leak measurement is performed for the injection path.
The flow path is purged.
When
|
Prerequisites
|
Run the Hydraulic Path Leak Test with the Agilent LabAdvisor and follow the provided instructions.
base-id: 6301367563
id: 36028803320331531