Specifications of the G7179A InfinityLab Assist Interface

Weight

1.1 kg (2.4 lbs)

Dimensions
(height × width × depth)

178.0 × 259.0 × 39.5 mm
(7.0 × 10.2 × 1.6 inches)

Line voltage

IEEE 802.3bt Class 5 (42.5 - 57 VDC)

Line frequency

N/A

Power consumption

IEEE 802.3bt Class 5 (42.5 - 57 VDC, 0.5 A)

Ambient operating temperature

+4 – 40 °C (39 – 104 °F)

Ambient non-operating temperature

-20 – 70 °C (-4 – 158 °F)

Humidity

relative maximum humidity of 90 % (non-condensing)

Operating altitude

Up to 3000 m (9842 ft)

Safety standards:
IEC, EN, CSA, UL

Overvoltage category II,
Pollution degree 2

For indoor use only

ISM classification

ISM Group 1 Class B

According to CISPR 11

Designed for use with Agilent InfinityLab Assist

Intuitive User Interface,
Automated Workflows,
Predictive Maintenance &
Assisted Troubleshooting

Instrument control

LC & CE Drivers 3.8 or above

InfinityLab Assist (G7180A) with software version 1.0 (E.01.00)

For details about supported software versions refer to the compatibility matrix of your version of the LC & CE Drivers

Communication

1× RJ45 Ethernet w/ Power over Ethernet (PoE)

2× USB A Ports w/ USB 2.0 (max. 2.5 W each)

1× USB Type-C® Port w/ USB 3.1 (max. 4.5 W each)

PoE includes communication and power supply

Ethernet cables used to connect the device shall meet Cat 5e or higher

Maintenance and safety-related features

Extensive diagnostics, error detection and display with Agilent InfinityLab Assist

Leak detection, safe leak handling, leak output signal for shutdown of pumping system, and low voltages in major maintenance areas

GLP features

Early maintenance feedback (EMF) for continuous tracking of instrument usage with user-settable limits and feedback messages. Electronic records of maintenance and errors.

Housing

All materials recyclable