The Agilent InfinityLab LC Series modules provide the following interfaces:
Module | CAN | USB | LAN (on-board) | RS-232 | Analog | APG (A) / ERI (E) | Special |
---|---|---|---|---|---|---|---|
Pumps |
|
|
|
|
|
|
|
G7104A/C | 2 | No | Yes | Yes | 1 | A |
|
G7110B | 2 | Yes | Yes | No | No | E |
|
G7111A/B, G5654A | 2 | Yes | Yes | No | No | E |
|
G7112B | 2 | Yes | Yes | No | No | E |
|
G7120A, G7132A | 2 | No | Yes | Yes | 1 | A |
|
G7161A/B | 2 | Yes | Yes | No | No | E |
|
Samplers |
|
|
|
|
|
|
|
G7129A/B/C | 2 | Yes | Yes | No | No | E |
|
G7167A/B/C, G7137A/B, G5668A, G3167A/B | 2 | Yes | Yes | No | No | E |
|
G7157A | 2 | Yes | Yes | No | No | E |
|
Detectors |
|
|
|
|
|
|
|
G7114A/B | 2 | Yes | Yes | No | 1 | E |
|
G7115A | 2 | Yes | Yes | No | 1 | E |
|
G7117A/B/C | 2 | Yes | Yes | No | 1 | E |
|
G7121A/B | 2 | Yes | Yes | No | 1 | E |
|
G7162A/B | 2 | Yes | Yes | No | 1 | E |
|
G7165A | 2 | Yes | Yes | No | 1 | E |
|
Fraction Collectors |
|
|
|
|
|
|
|
G7158B | 2 | Yes | Yes | No | No | E |
|
G7159B | 2 | Yes | Yes | No | No | E |
|
G7166A | 2 | No | No | No | No | No | Requires a host module with on-board LAN with minimum FW B.06.40 or C.06.40, or with additional G1369C LAN Card |
G1364E/F, G5664B | 2 | Yes | Yes | No | No | E | THERMOSTAT for G1330B |
Others |
|
|
|
|
|
|
|
G1170A | 2 | No | No | No | No | No | Requires a host module with on-board LAN or with additional G1369C LAN Card. |
G7116A/B | 2 | No | No | No | No | No | Requires a host module with on-board LAN or with additional G1369C LAN Card. |
G7122A | No | No | No | Yes | No | A |
|
G7170B | 2 | No | No | No | No | No | Requires a host module with on-board LAN with minimum FW B.06.40 or C.06.40, or with additional G1369C LAN Card |
G7175A | 2 | No | No | No | No | No | Requires a host module with on-board LAN or with additional G1369C LAN Card. |
NOTE
LAN connection is made between at least one of the Agilent modules and the Control PC.
CAN connectors as interface to other modules
LAN connector as interface to the control software
RS-232C as interface to a computer
USB (Universal Series Bus) for service workflows
REMOTE connector as interface to other Agilent products
Analog output connector for signal output
base-id: 3560178059
id: 36028800579142027