Error ID:
Slit Test Evaluation
Probable cause | Suggested actions | |
|---|---|---|
1 | Air bubble in Max-Light Cartridge Cell. | Flush the flow cell or use the Max-Light Cartridge Test Cell. |
2 | Old lamp. | Run the “Intensity Test”. Exchange the lamp if old or defective. |
3 | Defective slit assembly. | Please contact your Agilent service representative. |
4 | Defective detector main board. | Please contact your Agilent service representative. |
5 | Defective optical unit. | Please contact your Agilent service representative. |
base-id: 3526368907
id: 3526368907