Install the Bio-Inert Zero Dead Volume (ZDV) Union

The 5067-4741 (ZDV union (Bio-inert)) has two different connectors where capillaries need to be installed in the correct sequence. Otherwise, an inset of the union may be damaged and the connection may not be tight.

CAUTION

Potential leak or damage of the Bio-inert ZDV Union.

To avoid leaks or a damage to the Bio-inert ZDV union, follow the procedure below in the prescribed sequence.

Install the capillary at the end marked with a ring/indentation.
Install the second capillary at the other end.