NOTE
Only connect or disconnect the leak sensor while the valve drive is powered off.
The valve drive must be ‘powered off’ for at least 10 s to recognize any hardware changes correctly.
Attach the leak tray holder to the leak tray.
Push the leak sensor into its holder.
Slide the first clamp on to one side of the valve drive housing.
Slide the leak tray onto the bottom of the valve drive.
Slide the second clamp on to the same side as the first one.
Connect the leak sensor cable to the valve drive.
Attach the waste tubing to the leak plane and guide it to a proper waste container.
base-id: 3181734155
id: 3181734155