NOTE
For more information about the column organizer read the G1383-90011 Column Organizer Quick Reference Guide
Attach the column stand mount to the column organizer.
Attach both clamps to one side of the valve drive.
Install the leak tray and leak sensor to the valve.
Slide the valve onto the column stand mount.
Attach the waste tubing to the leak plane and guide it to a proper waste container.
Connect the power cable to the power connector at the rear of the module.
Connect the CAN interface connection to one of the CAN ports at the rear of the module.
Power on the module by switching the Power button at the rear of the module if a valve head has been already installed. Otherwise continue with G7116B_Installation of the Valve Heads.
base-id: 3181726219
id: 3181726219