Type | Specification | Comments |
|---|---|---|
Weight | 1.8 kg (4.0 lbs) |
|
Dimensions (height x width x depth) | 86.5 x 396.0 x 106.5 mm (3.4 x 15.6 x 4.2 inches) | Maximum outside |
Supply Voltage | 24 V DC |
|
Power consumption | 110 W |
|
Ambient operating temperature | 4 – 55 °C (39 – 131 °F) |
|
Ambient non-operating temperature | -40 – 70 °C (-40 – 158 °F) |
|
Humidity | < 95 % r.h. at 40 °C (104 °F) SampleThermostatIncluded | Non-condensing |
Operating altitude | Up to 3000 m (9842 ft) |
|
Safety standards IEC, EN, CSA, UL | Overvoltage Category II (in combination with the end-use product), Pollution degree 2 | For indoor use only |
ISM Classification | ISM Group 1 Class B | According to CISPR 11 |
[1]If a sample thermostat is included the upper value for humidity can be reduced. Please check your lab conditions to stay beyond dew point values for non–condensing operation.
Type | Specification | Comments |
|---|---|---|
Designed for use with Agilent InfinityLab Assist | Intuitive User Interface, Automated Workflows, Predictive Maintenance & Assisted Troubleshooting |
|
Temperature range | 5 °C above ambient to 80 °C |
|
Column capacity | 2 columns up to 30 cm and 4.6 mm ID |
|
Temperature stability | ± 0.10 °C | at sensor |
Temperature accuracy | ± 0.8 K (±0.5 K with calibration) |
|
Warm up time | 20 – 40 °C in 5 min | at sensor |
base-id: 4796510987
id: 18014403305992971-2