Error ID: 34221
The alignment of the transport assembly stepper motors failed during the initialization process.
Error ID: 34221,0 → Motor alignment failed at x-axis
Error ID: 34221,1 → Motor alignment failed at z-axis
Error ID: 34221,2 → Motor alignment failed at theta-axis
Error ID: 34221,3 → Motor alignment failed at gripper
Probable cause | Suggested actions | |
|---|---|---|
1 | Potential hardware error. | Please contact your Agilent service representative. |
base-id: 3758361867
id: 18014402267843851