Error ID: 30716
The pressure in the refrigerant circuit exceeded the maximum allowed level. To prevent any damage to the system, the compressor was turned off.
Probable cause | Suggested actions | |
|---|---|---|
1 | Overheated condenser. | Turn off the cooler/thermostat and wait for 15 min to allow the system to cool down. Verify if there is enough space around the sampler for adequate ventilation and the cooler/thermostat is not exposed to direct sunlight. |
2 | Potential hardware error. | Please contact your Agilent service representative. |
base-id: 3715808011
id: 18014402225289995