Control

With the Sample Thermostat installed, the Control dialog box of the hosting sampler will include the following thermostat-specific control options:

• At Power On:

  • Turn On Thermostat: The thermostat turns on automatically upon powering on the sampler.

• Thermostat:

  • On: The thermostat turns on and the system starts to regulate the temperature inside the sample space towards the setpoint.

  • Off: The thermostat turns off.

• Enable Analysis

  NOTE

  The Enable Analysis control setting is available since LC & CE drivers A.02.19.

  • With any temperature: The analysis starts regardless of the actual temperature inside the sampler.

  • Temperature within +/- 2 °C: The analysis starts only when the actual temperature is within the ± 2 °C range of the setpoint temperature.

    NOTE

    The Temperature within +/- 2 °C option is only available for the Sample Thermostat.