Replace the Module Firmware

When

Install a newer firmware

When

Install an older firmware

Software required

Tools required

Qty.		p/n	Description
1			Firmware, tools and documentation from Agilent web site

Prerequisites

To upgrade/downgrade the module’s firmware carry out the following steps:

Download the required module firmware, the latest FW Update Tool and the documentation from the Agilent web.
https://www.agilent.com/en-us/firmwareDownload?whid=69761
For loading the firmware into the module follow the instructions in the documentation.

Module Specific Information

There is no specific information for this module.

Module is a hosted module and always needs to be connected to a host with matching firmware of same revision.

**Table:** Module Specific Information (G7114A/B)
	G7114B	G7114A
Initial firmware	D.06.70	D.07.01
Compatibility with 1100 / 1200 series modules	When using the G7114A/B in a system, all other modules must have firmware from set 6.50 or above (main and resident). Otherwise the communication will not work.
Conversion / emulation	Possible via Lab Advisor software: G7114B: G1314E/F G7114A: G1314F

**Table:** Module specific Information (G7115A DAD/G7165A MWD)
	G7115A DAD	G7165A MWD
Initial firmware (main and resident)	D.07.01	D.07.01
Compatible with 1260/1290 Infinity modules	When using the G7115A or G7165A in a system, all other modules must have firmware revision from firmware set 7.00 or above (main and resident).
Compatibility with 1100/1200 Series modules	When using the G7115A or G7165A in a system, all other modules must have firmware revision from firmware set 7.00 or above (main and resident). Otherwise the communication will not work.
Conversion to / emulation of G1315D or G1365D	G7115A allows conversion to G1315C/D DAD, G1365C/D MWD G7165A allows conversion to G1365C/D MWD

**Table:** Module specific information (G7117 A/G7117B/G7117C)
	G7117B 1290 DAD	G7117A 1290 DAD FS	G7117C 1260 DAD HS
Initial firmware (main and resident)		D.06.07	D.07.01
Compatibility with 1100/1200/1260/ 1290 series modules	When using the detector in a system, all other modules must have firmware from set 6.50 (latest version) or later (main and resident). Otherwise the communication will not work.
Conversion to / emulation	G4212A, G4212B, G7117A	G4212B	-

**Table:** Module specific information (G7162A/G7162B)
	G7162A/B
Initial firmware	D.06.76
Compatibility with 1100 / 1200 series modules	When using the G7162A/B in a system, all other modules must have firmware from set 6.50 or above (main and resident). Otherwise the communication will not work.
Conversion to / emulation	Not available

21-Jun-2025