Using the Assist Control Software Browser User Interface
InfinityLab Assist Control Software provides a user interface that runs on the Assist Interface. InfinityLab Assist Control Software can also be accessed remotely in Web browsers.
NOTE
On displays wider than 1280 pixels, the appearance of the browser's user interface differs from that of the Assist Interface.
Accessing the InfinityLab Control Software with a Web Browser
Access the browser user interface using the CDS (via the dashboard tile) or manually by entering the address in the web browser.
- The PC or mobile device is in the same subnet as the Assist Hub.
- You are using a Chromium-based browser (Chrome, Edge, Firefox, etc.) with a version higher 124.
- You are using a Safari-based browser with version higher 17.5.1.
- LC & CE Drivers with version 3.8 or above are installed.
Accessing the Browser User Interface via the CDS
In the CDS, navigate to the Instrument Status Dashboard.
Open the context menu of the Assist Hub tile (via right-click) and select Open in browser...
- The browser user interface of the Assist Control Software is launched.
Accessing the Browser User Interface via the Address Bar of the Web Browser
On the PC or mobile device, open your browser.
In the address bar, enter the IP Address of the Assist Hub (http://<IP address>) or the MAC address with domain (http://<macaddress>.<fully qualified domain>). The device information, such as the MAC address, can be found on the Assist Hub label.
- The browser user interface of the Assist Control Software is launched.
base-id: 10600125067
id: 10600125067