Assist Control Software Status Color Coding

The status bar at the top of InfinityLab Assist is color-coded according to the overall status of the instrument. On displays wider than 1280 pixels, the status bar is located on the left side of InfinityLab Assist.

Status		Description
	Offline	The connection to the instrument is lost (all modules switched off or LAN connection disconnected, for example), or an unsupported module or firmware is present in the LC system.
	Idle	The instrument is on and ready to process samples.
	Not Ready	The instrument is connected but is not ready to run (due to not reaching the correct temperature or pressure required by the method, for example).
	Error	The instrument has an error and cannot process samples.
	Standby	The instrument is in a standby/sleep state.
	Pre-Run	The instrument is on and is preparing to start acquisition.
	Injecting	Data acquisition is ongoing.
	Run or Post-Run	The instrument is collecting data.