Specifications of the G7123B Fluorescence Detector

Weight

15.9 kg (35.05 lbs)

Without flow cell

Dimensions
(height × width × depth)

203 x 396 x 436 mm
(8.00 x 15.59 x 17.17 inches)

Line voltage

100–240 V~, ±10%

Wide-ranging capability

Line frequency

50 or 60 Hz, ±5%

Power consumption

25 W (idle)

240 VA; 240 W

Idle

Lamp on + Multi-WL mode

Ambient operating temperature

4–40 °C (39–104 °F)

Ambient non-operating temperature

-40–70 °C (-40–158 °F)

Humidity

< 95% r.h. at 40 °C (104 °F)

Non-condensing

Operating altitude

Up to 3000 m (9842 ft)

Safety standards:
IEC, EN, CSA, UL

Overvoltage category II,
Pollution degree 2

For indoor use only

ISM Classification

ISM Group 1 Class B

According to CISPR 11

Detection type

Fluorescence Detector

Designed for use with Agilent InfinityLab Assist

Intuitive User Interface,
Automated Workflows,
Predictive Maintenance &
Assisted Troubleshooting

Single wavelength operation

Raman SNR > 2500

Raman SNR vs Dark > 30000

Raman SNR:
EX: 365 nm, EM: 416 nm (height, noise)

Raman SNR vs Dark:
EX: 365 nm, EM: 416 nm (height) / 470 nm (noise)

response time = 4.2 sec

PMT = Standard

Light source

Hg-Xe arc lamp 150 W

Lifetime 3000 h

Guaranteed lifetime = 1400 h, permissible 3000 h. Lamp lifetime based on intensity and operational safety.

Maximum data rate

160 Hz

Wavelength range (Ex, Em)

Settable range 200 nm – 1200 nm and zero-order

Spectral bandwidth (Ex, Em)

<= 20 nm

Wavelength accuracy

+/- 3.0 nm

Wavelength precision

+/- 0.2 nm

Reference system

Reference diode

Timetable programming

Wavelength (Ex, Em)

PMT Gain

Multi-channel acquisition

Up to 5 channels

Maximum data rate 5 Hz

Spectrum acquisition

Excitation and Emission spectra

Scannable range 200 nm – 800 nm

Step size 1 nm - 20 nm

Flow cell volume

2 µL volume

13 µL volume

Maximum pressure

60 bar (6 MPa)

pH range

1.0 ... 12.5

Solvent dependent

Wetted materials

MP35N, Fused Silica, FEP

Bio compatible

Analog output

100 mV or 1 V full scale

BNC connector type

Instrument Control

LC & CE Drivers 3.11 or above

Instrument Control Framework (ICF) 3.5 or above

Lab Advisor 2.23 or above

Assist Control Software 2.1 or above

Instant Pilot (G4208A) with firmware B.02.26 or above

For details about supported software versions refer to the compatibility matrix of your version of the LC and CE Drivers

Communication

LAN, CAN, USB,
ERI: ready, start, stop and shutdown signals

Safety features and maintenance

Leak detection, safe leak handling, leak output signal for shutdown of the pumping system.

No hazardous voltages in major maintenance areas.

Extensive diagnostics, error detection and display.

GLP features

Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with pre-defined and user settable limits and feedback messages.

Electronic records of maintenance and errors.

Maintenance

Tool-free lamp exchange

Tool-free flow cell exchange

Tool-free lamp house window exchange

Tasks designed for safe customer handling

Housing

All materials are recyclable.