Slit Test Evaluation
Probable cause | Suggested actions | |
|---|---|---|
1 | Air bubble in flow cell Air bubble in flow cell. |
Flush the flow cell or remove the flow cell. |
2 | Old lamp Old lamp. |
Run the “Intensity Test”. Exchange the lamp if old or defective. |
3 | Defective slit assembly Defective slit assembly. | Please contact your Agilent service representative. |
4 | Defective detector main board Defective detector main board. | Please contact your Agilent service representative. |
5 | Defective optical unit Defective PDA/optical unit. | Please contact your Agilent service representative. |
base-id: 3358477195
id: 9007202613218187