Sampler Alignment Procedure Command Failed

Error ID: 25034

The autosampler failed to complete the alignment correctly.

Subpages

Probable cause	Suggested actions
1	Mechanical obstruction of the sample handler Mechanical obstruction of the sample handler.	Ensure unobstructed movement.
2	Defective sample handler motors Defective sample handler motors.	Please contact your Agilent service representative.

Probable cause

Suggested actions

Mechanical obstruction of the sample handler

Mechanical obstruction of the sample handler.

Ensure unobstructed movement.

Defective sample handler motors

Defective sample handler motors.

Please contact your Agilent service representative.