1 | Power Button |
2 | Power over Ethernet (PoE) connection used for the Assist Interface |
3 | Garage for the Display Holder |
1 | 2-position configuration switch:
|
2 | Reset button: The reset will lead to a complete data loss and a reset to factory settings. Turn OFF the Assist Hub. Use a 8710-1977 (Hex key, 0.9 mm, long arm metric ) to press and hold the reset button. Turn ON the Assist Hub and continue pressing the reset button until the Status LED starts flashing red. Once the flashing has stopped, the reset is complete. The Assist Hub turns on. |
base-id: 5000333835
id: 27021602764556811