Error ID: 2243, 8016
The pump board gets no or wrong pressure signals from the built-in degasser:
No valid pressure signal is shown during startup of the degasser
Measured pressure is higher than 32000 hPa
Probable cause | Suggested actions | |
|---|---|---|
1 | Degasser sensor defect Degasser sensor defect. | Please contact your Agilent service representative. |
2 | Degasser sensor not connected to main board Degasser sensor not connected to mainboard. | Please contact your Agilent service representative. |
base-id: 3821425803
id: 27021601585648779