For best performance of the detector:
After ignition, let the lamp warm-up and stabilize for at least 30 minutes. Measurements at the detection limit might require a longer equilibration time.
For high sensitivity measurements, a stable environment is required; refer to Environment. Prevent drafts from air condition systems.
Avoid vibrations, as well as larger temperature variations.
Do not work with removed/open front panels/doors. When the system includes a G1316 TCC (typically located below the detector) and its front panel is removed while the TCC is set to high temperatures, the up-streaming air could influence the stability of the detector baseline.
base-id: 13331521163
id: 13331521163